My RPS-13

[Scottro]

http://studentweb.ewu.edu/spiepel37/pics/swap/SR1.jpg
http://studentweb.ewu.edu/spiepel37/pics/swap/SR2.jpg
http://studentweb.ewu.edu/spiepel37/pics/swap/SR3.jpg
http://studentweb.ewu.edu/spiepel37/pics/swap/SR4.jpg
http://studentweb.ewu.edu/spiepel37/pics/swap/SR5.jpg
http://studentweb.ewu.edu/spiepel37/pics/swap/SR6.jpg



thats mine. :bigthumbs:

[Gsolo]

what year is that sr20??? I thought they had the "distributor/sensor" thing mounted on the front off the cam...

...or am i thinking of ca18det and RB's

[thursday]

you may be thinking of the JDM front wheel drive sr. The CAS is right above the upper radiator hose on the head in his last pic.


Like the konig rewinds, decent rear offset, now lower that bad boy :)

[Ninja_Bear]

I see that car on Division all the freakin time...

[Scottro]

what year is that sr20??? I thought they had the "distributor/sensor" thing mounted on the front off the cam...

...or am i thinking of ca18det and RB's



that is exactly correct.
the CA/RB have the sensor actually attached to the exhaust cam.







and Ninja_Bear..... red MKIII turbo right???
and thursday..... it is lowered.... lol. its down 2 inches. they are 4x4's from the factory. i want coilovers.... but i like being able to make it over speed bumps.

[Ninja_Bear]

yes that would be me. Ive pulled up by you a few times. compressor surgin like crazy...

[KryptoSol]

I see you car in Cheny all the time... and then you reving and blowing off at me one time i was driving by on Division. I thought it was cute, my wife thought it was gay.

[Mr. Hoy]

clean, but be careful who ya toy with, there seems to be many people out there wanting to kill 240's these days.

[Scottro]

KryptoSol-
haha. i have a tendency to do that.
i cant help it. its easier than saying hi.



i think the screw on the bov is close to all the way out. once i get my boost gauge hooked up im gonna tighten it down so it only opens in boost instead of vacuum too.


and Larry, as much as i drive around, the best thing ive lined up against is a C6. he pulled a little, but i think i suprised him.
i need to get my ass out to the track. the butt dyno tells me im running 14.0-13.8 territory.

[Gsolo]

the butt dyno tells me im running 14.0-13.8 territory.


...i was thinking same thing...if you have the late model sr20 i believe they were 220hp...you could probably brag a 13.5 out at SRP but 14 flat is safe bet


start working on that motor...300 hp is relatively easy to acheive and probably get shy under 13

[Supra98]

no he has the black top non vtc it has 205hp same as the red top.

[Scottro]

yep.

actually.
all i need is injectors, an S15 turbo, MBC and an SAFC or something and ill be in the 12s


ask Mr.Hoy ;)




but thats about 2g's more than i have right now.

[erogori]

Lookin good Scott.

[Mr. Hoy]

yep.

actually.
all i need is injectors, an S15 turbo, MBC and an SAFC or something and ill be in the 12s


ask Mr.Hoy ;)




but thats about 2g's more than i have right now.


haha 12's I did minus injectors, afc, and S15 turbo, I still wonder why my engine is in one piece. lol S14 T28 FTW:riaa:

I have a set of d-werks 555's if you want them, I will make ya a good deal on them. Brand new never used, still in plastic wrapping and they are plug and play.

[Gsolo]

that runs side feed correct??

[Mr. Hoy]

that runs side feed correct??


Yes, side feed, the Pulsar GTI-R SR runs top feed