WTB/T: 1G DSM TB / 2g DSM TB Elbow

[mirage4g93]

Just like the title says I'm looking for a 1g perferably 91-93 DSM TB and an Elbow off of a 2g DSM TB.

Will buy or trade 550c Darkside Racing DSM Injectors.

contact via:
Pm
aim: road race rage
email: mirage4g93@hotmail.com

[a1320honda]

id be interested in those injectors if you dont trade em.

[mirage4g93]

80 bucks I can sell them today.

[mirage4g93]

So no response about the injectors yet.

Does anybody want these?

[talntid]

Scott will trade 1g intake manifold, 1g tb with all sensors for injectors? these are from n/t 4g63, but that just means they are slightly larger in diamater. :)

[mirage4g93]

ya gotta remember this is going on my mirage so the NT is too big. I can't port match my intake manifold to 63mm. 60mm is the most I can port the g93 manifold to.

[talntid]

so use this intake manifold?

[96gsx]

You don't need to port match anything.??The butterfly is 60mm, same size as the turbo TB.??Just has a 62 lip, which I personaly like better.??

[mirage4g93]

intake manifold doesn't bolt up by the way. Its a 4g93 not 3g63. As much as you would want to thing the head is similar they are completely different. It really is a pain in the ass.

[mirage4g93]

Scott and/or Eric so I confirmed that the TB will work but can you get a pic with the ISC and one with the TPS. One of my g93 gurus needs to see if they are the correct ones for my application.

Thanks

[96gsx]

All TPS/ISC are the same for both NA/turbo modles from 91-94. The 1990 TB/Sensors was the odd year that wont work with any other years from 91-94.. 95-99 TPS have the ISC motor built in. This is from a 92 Talon and has a working TPS that I've tested.

I have some pics uploaded to my Photobucket from when I was trying to sell a complete 1g head/intake/tb swap 6moths ago..

http://i18.photobucket.com/albums/b122/scottsee/mic/Engine/100_2909.jpg
http://i18.photobucket.com/albums/b122/scottsee/mic/Engine/100_2971.jpg

[mirage4g93]

Ok well found out that the tb and sensors are the ones I need. I still can't use the manifold though cause it just doesn't line up, but I am still down to trade.

[talntid]

When and where? :)

[96gsx]

You are more then welcome to have the Intake Manny, I really don't want to bother taking it apart.??I'm at work untill 8pm tonight, I live on the nothside in the Ceader Springs complex.??You can call me anytime you like.??Just let me know what day you want them.??I can take them to work (hallmark hyundai in the valley) or you can come over.??What ever is easyier for you

Scott See
280-1969 Cell
922-1450 Work *best*

[mirage4g93]

thats cool. could we possibly swap sometime after you get off of work tonight. I am open all night.

[96gsx]

All right. I need to go across the street and clean my car up tonight after work, it's bad... I should be home by 9pm.

[mirage4g93]

k how about Alberson's on Nevada and Lyons @ 9:15?

[96gsx]

Sounds good. I need your cell in case I'm running late.. Shoot me a PM