View Full Version : Project started.....
x NOODLES x
11-18-2008, 08:21 PM
Well I pulled the car into my buddies garage tonight and am ready to molest my baby.
Mods going on are as follows .....
Steigemeier Stage 5 w/ 2.76
Billetflow 4pc. Idlers (New style snub)
Invictus Head Cooling Mod (Style 2)
Diablosport MAFia
KB Boost-a-pump
Siemens 60lb. Injectors
NGK TR7's
NOS Kit w/ dual purge(50-100 shot most likely)
Gatorback Belt (74.5)
26/11.5/17 ET streets on stock Chromies
LMM Airbag setup
Project should be done w/in a month, and then will have to sit all winter until next spring...... damn northwest.
That is except for making my buddy get his car trailer and tow it to Brian.....
PS - Better get to work talntid!!!lol
Northwest outlaw
11-18-2008, 08:26 PM
cool deal get to work.
twotons
11-18-2008, 10:11 PM
Sweet, if you need a hand let me know. Those tr7 plugs might be a little cold for a 15 pound tune.
talntid
11-18-2008, 11:06 PM
Bah. Looks like I need to get off my ass. Thats gonna be one bad snake!!!!
jzcobra
11-19-2008, 08:01 AM
Are you still running the stock IRS?
Looks like a fun project! I've only got a few winter mods planned.
black69camaro
11-19-2008, 11:57 AM
Hey NOODLES where are you planning on getting that KB boost pump, and injectors?
x NOODLES x
11-19-2008, 02:45 PM
Sweet, if you need a hand let me know. Those tr7 plugs might be a little cold for a 15 pound tune.
You think?? Even w/ the nitrous?? And that damn eaton gets soo hot.......
x NOODLES x
11-19-2008, 02:47 PM
Hey NOODLES where are you planning on getting that KB boost pump, and injectors?
Got em.
lethalperformance.com sells both, however i got the bap off ebay and the injectors new from a guy on svtperformance.com
twotons
11-19-2008, 03:05 PM
Well when i did the kenne bell on Chris's cobra, they only recommended 6's with the 19 pound pulley. and Adrians car at 13 or 14 pounds and nitrous was only runnin 6's as well.
black69camaro
11-19-2008, 03:25 PM
thanks for the response NOODLES, cant wait for more info on the build!!!
x NOODLES x
11-19-2008, 07:50 PM
Well when i did the kenne bell on Chris's cobra, they only recommended 6's with the 19 pound pulley. and Adrians car at 13 or 14 pounds and nitrous was only runnin 6's as well.
Why would 7's hurt though??
From my research the 7's gapped at 30 should be just fine??
Maybe not?
x NOODLES x
11-19-2008, 07:52 PM
Are you still running the stock IRS?
Looks like a fun project! I've only got a few winter mods planned.
Already on the car are
MM FLSFC's
Billetflow IRS Brace
Billetflow IRS Brackets
With adding the LMM airbags and actual Slicks, the rearend should be OK.
Should be. lol.
jzcobra
11-19-2008, 10:18 PM
As long as you don't wheel hop lol.
What was the best 60ft you have cut with it so far?
x NOODLES x
11-20-2008, 07:51 PM
As long as you don't wheel hop lol.
What was the best 60ft you have cut with it so far?
1.97 on BFG KDW's.
Just regular ol street tires. That was the same run I got the 12.33@ 114
Since then I've hit 115 but the tires are a little more worn and frankly I just haven't gone enough.
vBulletin® v3.8.0, Copyright ©2000-2012, Jelsoft Enterprises Ltd.