Update on the SRT

[SRT Brian]

Here are the pictures.

http://i99.photobucket.com/albums/l305/kosonen04/Cam%20install/P1010518.jpg

[supercomp712a]

Looking good dude! She will fly...

[SRT Brian]

Thats the plan :)

[Silver R/T]

how much was it to coat those headers?

[Rollincoal]

Damn, 1000hp axles, sounds pretty bullet proof, anyone wana guess what he will break then?

[BlackMagic]

Damn, 1000hp axles, sounds pretty bullet proof, anyone wana guess what he will break then?

The track front gate after they throw him out for running too fast.

[SRT Brian]

how much was it to coat those headers?

For this style it was $350. If you want something done I can get you a better deal. Its there ChromeX Coated inside and out.

[SRT Brian]

The track front gate after they throw him out for running too fast.

Naw I wont run to fast. Im good tell 11.49.

[sr240]

u need 1000hp axles to only go 11s..... that sux..

[SRT Brian]

If the mods can just del. This thread. Seems people cant appreceate shit.

[Silver R/T]

If the mods can just del. This thread. Seems people cant appreceate shit.

I wouldn't worry about all the haters man. It's your car and you're doing fine, some people just talk trash cause they ain't got shit themselves.

[x NOODLES x]

Damn, I wanted to see pics.....

[Jetblack]

Naw I wont run to fast. Im good tell 11.49.

But for 10's you'll need a new flywheel and that blanket thingy or a shield for the bell housing. And the cage... suddenly, you start to wonder if this is a good idea.

And the new axles, I forgot about those. I was going to ask you about the flywheel and axle thing. It is in the regs. And I might go up a speed, too, just to be safe, unless your car has gone on a diet. 4000+ pounds is a lot to launch on wrinkle-sidewall slicks. Drive shaft, tranny, diff... that's a lot of force.

Are you going to tub it for wider tires? More scary stuff.

[SRT Brian]

I have looked into it all! I think I will be faster than 11.49. I wont be in the 10's tho. My tranny is good for 800HP. My drive shafts are the same, my Rear Diff is good tell about 700HP. My axles are the week spot in the car. If I need a roll bar thats no big deal.

[BlackMagic]

I wouldn't worry about all the haters man. It's your car and you're doing fine, some people just talk trash cause they ain't got shit themselves.

Says the guy who gets stuck on railroad tracks.

[BlackMagic]

If the mods can just del. This thread. Seems people cant appreceate shit.

I appreciate alot. I just don't like your attitude most of the time.

You asked in the other thread what you did to piss me off...how about talking shit to any Honda driver on the forum. So I called you out and you just tucked your tail.

[SRT Brian]

Lol your a funny guy! I will race you any time. Did I ever say I would win? Nope I will race anyone! Prostreet, funny car, top fuel. Now that would be fun!

[scooter]

live and let live people, goddamn:D

[GetawayInMoscow]

Damn, 1000hp axles, sounds pretty bullet proof, anyone wana guess what he will break then?

The output shafts on the stock diff

[BlackMagic]

Lol your a funny guy! I will race you any time. Did I ever say I would win? Nope I will race anyone! Prostreet, funny car, top fuel. Now that would be fun!

ok then. $100.00 2 out of 3 on pump gas. Should we make it interesting and go $500.00?

[SRT Brian]

Lol dude, I know i wont win. Why would I even bet? Im out there to have fun. Who knows how the car is even going to do, before geting tuned

[Silver R/T]

Says the guy who gets stuck on railroad tracks.

Yes I did. so fucking what? Do you have something to prove dude, your point being is?

[SRT Brian]

Lol Yeah what do you want to prove? that your Honda is faster than my Daily Driver thats 4300 pounds?

[Silver R/T]

Lol Yeah what do you want to prove? that your Honda is faster than my Daily Driver thats 4300 pounds?

just a typical Honda driver. Once I get my setup on Cummins I'll be smoking these little ricers all over town and track.

[Rollincoal]

What are you doing to the truck?

[Silver R/T]

What are you doing to the truck?

Edge Juice/Smarty, injectors, bigger turbo/exhaust and we'll see from there.

[BOOGEYMAN]

just a typical Honda driver. Once I get my setup on Cummins I'll be smoking these little ricers all over town and track.

How long till you get this done...? This year anytime?

Travis

[BOOGEYMAN]

Brian, your parts look great man!!! Its always nice to get new shiny parts for the hot rod. :)

Travis

[Silver R/T]

How long till you get this done...? This year anytime?

Travis

depending how busy we stay at work. As you know our economy took a giant dump so it's not easy to stay in business for most businesses.

[SRT Brian]

Brian, your parts look great man!!! Its always nice to get new shiny parts for the hot rod. :)

Travis


Thanks Travis!

[BOOGEYMAN]

just a typical Honda driver. Once I get my setup on Cummins I'll be smoking these little ricers all over town and track.

Max....care to put your money where your mouth is??

I have 1K on Reid againt you.....

I have 1K on Steve againt you.....

Both honda's.....

Sound good?

Travis

[a1320honda]

just a typical Honda driver. Once I get my setup on Cummins I'll be smoking these little ricers all over town and track.


You might wanna watch what your really sayin about the honda crowd on here. Theres more than one 4-banger on here that'll drop kick your trucks nuts though its head. But if it makes you feel better, my little honda has the same Holset turbo your cummins has, mines off a 98 manual. and itll be tuned on about 25psi. Good luck.

Ill put my $1000 to your $100 that your diesel truck isnt gonna touch my Honda! Sound good...GOOD!

BTW, stuff looks good Brian. I can tell youve layed off the honda smack talking since i said something, and its appreciated.

[SRT Brian]

Thanks Steave. Im not here thinkin im better than everyone, its just hard sometimes to tell when one person is joking or just smack talkin. So I figgered I would just stop.

[SOMTA]

Thanks Steave. Im not here thinkin im better than everyone, its just hard sometimes to tell when one person is joking or just smack talkin. So I figgered I would just stop.

Quit making excuses, sarcasm is so easy to pick up over the internet you inbred dodge loving hick... says the mullet man with the TA! :D

[Silver R/T]

You might wanna watch what your really sayin about the honda crowd on here. Theres more than one 4-banger on here that'll drop kick your trucks nuts though its head. But if it makes you feel better, my little honda has the same Holset turbo your cummins has, mines off a 98 manual. and itll be tuned on about 25psi. Good luck.

Ill put my $1000 to your $100 that your diesel truck isnt gonna touch my Honda! Sound good...GOOD!

BTW, stuff looks good Brian. I can tell youve layed off the honda smack talking since i said something, and its appreciated.

Put 6,000lbs on your honda and we got a race buddy.

[BOOGEYMAN]

Put 6,000lbs on your honda and we got a race buddy.

Just as I thought more excuses from max........Why did you say you would smoke the little ricers all over town and the track then?? Why did you say "just a typical Honda driver".??

Did you mean you would smoke only the 4cyl cars that weight what you weigh......your a fucking joke once again max!!!!!

It is offical that Max is scared of 4cyl hondas....!!!!

Travis

[a1320honda]

Put 6,000lbs on your honda and we got a race buddy.

NOOO, thats not how it works. You were running your mouth about smoking hondas, so i stepped up and presented a challenge, now you wanna tell me to put 6000lbs on. Get real dude. If your not gonna run my honda, then you should prolly just keep your lips zipped. Otherwise....go to the ATM and dig up some cash. You said you were gonna smash on all the hondas around here. Here i am with my Honda.

Sorry Brian for taking over your thread.

Silver R/T, If you wanna continue this, PM me and we can handle it.

[scooter]

and us bunch of apes wanna go see a movie together? we'd all beat the shit out of each other before we even got inside!!!!!!:D

[x NOODLES x]

Ahhh,, The same ol' Spokanespeed finally rears its ugly head.....

[Silver R/T]

NOOO, thats not how it works. You were running your mouth about smoking hondas, so i stepped up and presented a challenge, now you wanna tell me to put 6000lbs on. Get real dude. If your not gonna run my honda, then you should prolly just keep your lips zipped. Otherwise....go to the ATM and dig up some cash. You said you were gonna smash on all the hondas around here. Here i am with my Honda.

Sorry Brian for taking over your thread.

Silver R/T, If you wanna continue this, PM me and we can handle it.

1. If you think I'm going to run stock ~7k lb truck against heavily modified honda you're moron
2. My money goes to pay for mortgage ---- It's my PRIORITY #1, if you think I'll be spending money just to race a honda you're twice a moron.
3. I respect cars that were built well, not just riced out
4. My truck is pretty much stock, take all of your mods off and I'll run you stock vs stock to be fair (even though truck is triple your weight)
5. There's plenty of dodges who will smoke your honda, don't feel like you're superior to anyone....well maybe to a 16 yr old kid who just bought his first Honduh. You're god to him.

[SRT Brian]

Lol This is great. can we try to keep it back on track maybe?

[jzcobra]

Headers look great!

[BOOGEYMAN]

Sorry Brian.....lol. I will get a hold of you tomarrow on the paint! :)

Travis

[SRT Brian]

Lol not a problem man.

[jrhaile]

Brian will you be driving your car on the street?

[SRT Brian]

Yep. Its a daily driver

[Gsolo]

i gave up reading the posts after the second page ....

Headers look really good, seems well worth the $$$

[SRT Brian]

Lol just like every thread on SS this one got off topic fast. but then back on lol. But thanks!

[Bskylerj]

Headers look good. What axles did you order?

[SRT Brian]

Some big ones :)

[AWD_Launch]

You probably already posted this but what is the current mod list and future? I can't wait to see this in action, looks like a pretty cool and unique thing to build and should be a crazy sleeper.

[flybynight]

Lol your a funny guy! I will race you any time. Did I ever say I would win? Nope I will race anyone! Prostreet, funny car, top fuel. Now that would be fun!

Ok Brian I dont have a funny car but Ill race you on one condition, your
dad has to drive and tell him hello from Jody, car is looking awesome by the way

[SRT Brian]

Jody? Were have I heard that name from?

[SRT Brian]

You probably already posted this but what is the current mod list and future? I can't wait to see this in action, looks like a pretty cool and unique thing to build and should be a crazy sleeper.

Im not going to let the cat out of the bag :) PM Me and I will fill you in

[flybynight]

Jody? Were have I heard that name from?

I painted at Silver auto in Osburn for years, and your Dad married my wife and I

[SRT Brian]

OOOOOO ok! I new I heard that name! How you been! Shit I dident know you were into racing.

[flybynight]

OOOOOO ok! I new I heard that name! How you been! Shit I dident know you were into racing.

Been playin with a car I first built in the 80s a 65 mustang,sold to a friend in Oregon in 85 and bought back 2 years ago put it back on the street and track, went 10.02 @ 133 last year trying to run mid 9s this year if I can get all legal.

[SRT Brian]

Nice. I will see you at the track then :)

[SRT Brian]

Update:

Got the Heads,Headers on, Got the axles.

http://i99.photobucket.com/albums/l305/kosonen04/Cam%20install/IMG00019-20090226-2130.jpg
http://i99.photobucket.com/albums/l305/kosonen04/Cam%20install/CIMG1227.jpg
http://i99.photobucket.com/albums/l305/kosonen04/Cam%20install/CIMG1232.jpg
http://i99.photobucket.com/albums/l305/kosonen04/Cam%20install/CIMG1234.jpg

[SRT Brian]

http://i99.photobucket.com/albums/l305/kosonen04/Cam%20install/CIMG1225.jpg

[GetawayInMoscow]

I still think you are going to break your output shafts...

Headers look good though :bigthumb:

[SRT Brian]

Why do you always have no nock on someones shit? I guess if i had a vette I would be cooler

[x NOODLES x]

All I know is Cobra's with Level 5 DSS half-shafts break JUST as much as stock if they are running a DR. And they break JUST as much as stock if they are running a bias-ply.

Headers look fantastic, I wish I had some!!

[Ryfly05]

Looks real good. Ported heads?

[supercomp712a]

Really looks sharp dude! Are those the stock heads?

[SRT Brian]

No the heads are ported, they are the Inerita Big Valve Heads

[smoke20]

I saw you leaving Airway Heights tonight when I was going home.. You were coming to a stop so I didnt get to hear it :(

[SRT Brian]

Wasent me, that must of been phil

[supercomp712a]

Ya that was me. I was coming from the tire store after dropping a ton of dough on front end work and tires (Damn shitty Spokane roads).

BTW, You would not have heard much, mine is the slug of the group.

[SRT Brian]

Plus I dont think mine would run to good with out a intake manafold?? Or would it? lol. Plus I wouldent drive my car in this weather, I would walk before that.

[supercomp712a]

It was nice yesterday, that is why I parked the jeep, took the day off, and got it fixed.