RBMonster
04-15-2009, 10:03 AM
City:Spokompton
State/Province:WA
Price:$7000 Takes it ALL
Item Description:
Motorset:
The motorset is still going to need the following:
Intercooler/piping
Downpipes/exhaust
Fuel system
ECU or some kind of engine management
Oil system
Wire harness wired fo an S14
Block/bottom end:
R32GTR RB26DETT Motor set
Weisco 88mm Pistons $799 (total displacement is now 2.7 instead of 2.6)
ACL main and rod bearings $250
ARP Head studs $265
ARP Rod bolts $90
Jun Crank collar $125
Machine Work and assembly $700 (balancing, blueprinting, clearenced, everything was done that could be done) Done by Performance machine in Knoxville T.N.
Cylinder Head/top end
Full port and polish and clearenced for HKS 272 Step 2 cams. All head work done by High Velocity Heads in Knoxville T.N. http://www.highvelocityheads.com/
Head flowed 315 CFM on flow bench. 3 angle valve job. $1,900. Head assembled minus camshafts, buckets and shims.
HKS 272 Step 2 intake and exhaust camshafts $750
HKS springs, retainers, locks, $350
HKS adjustable cam gears $150
Tomei adjustable cam gears $100
Tomei Full metal gasket kit with oil restrictor $125
Whiteline bottom mount turbo manifolds $200
Garrett T28 turbos $500 each
HKS 3037 Turbo kit SOLD
Nismo timing belt $125
Greddy pulley kit $225
ATI Engine Dampener $400
CUSTOM MADE ONE OF A KIND BDL Fuel Rail LOOKS SICK!!!!!! $350
HKS valve cover garnish (VERY HARD TO FIND) $200
Driveline and other misc items
Top Hat RB26 to 240sx mounts $300
Top Hat RB26 to 240sx driveshaft $300
Nismo/Excedy twin plate clutch *USED CLUTCH* $600
Tomei RB25 short shifter *USED* $125
Trust 3' downpipes with collector $150
KOYO Aluminum radiator for KA (need it for the RB26 swap) $300
New rb26 alternator with custom mount $200
All wiring is included and uncut $300
RB25DET 5 Speed transmission $1500
All bolts and fasteners are included and most are labeled. They are all in bags
Full factory engine manual
Most receipts and paperwork for parts will be included
Several new OEM nissan seals and gaskets
I also spent A LOT of money having parts polished like the CAS, igniter, water neck, throttle bracket, turbo intake pipe, etc. That, and the powder coating job for the engine and valve covers.
And pretty much anything else I can find in the garage goes with it.
There might be more that I'm leaving out and I'll do my best to find it all. With proper tuning and fuel system I'd say 700WHP should be attainable on moderate boost
If you see something in the pictures e-mail me. There's so much ish that I don't feel like typing it all out.
http://img.photobucket.com/albums/v677/Wingnut500/P4070010.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070010.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070012.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070013.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070016.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070017.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4080072.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P8070019.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P9010026.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P8300023.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P1010014.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P1010017-1.jpg
http://img.photobucket.com/albums/v677/Wingnut500/4.jpg
http://img.photobucket.com/albums/v677/Wingnut500/67y545hyh.jpg
http://img.photobucket.com/albums/v677/Wingnut500/66.jpg
State/Province:WA
Price:$7000 Takes it ALL
Item Description:
Motorset:
The motorset is still going to need the following:
Intercooler/piping
Downpipes/exhaust
Fuel system
ECU or some kind of engine management
Oil system
Wire harness wired fo an S14
Block/bottom end:
R32GTR RB26DETT Motor set
Weisco 88mm Pistons $799 (total displacement is now 2.7 instead of 2.6)
ACL main and rod bearings $250
ARP Head studs $265
ARP Rod bolts $90
Jun Crank collar $125
Machine Work and assembly $700 (balancing, blueprinting, clearenced, everything was done that could be done) Done by Performance machine in Knoxville T.N.
Cylinder Head/top end
Full port and polish and clearenced for HKS 272 Step 2 cams. All head work done by High Velocity Heads in Knoxville T.N. http://www.highvelocityheads.com/
Head flowed 315 CFM on flow bench. 3 angle valve job. $1,900. Head assembled minus camshafts, buckets and shims.
HKS 272 Step 2 intake and exhaust camshafts $750
HKS springs, retainers, locks, $350
HKS adjustable cam gears $150
Tomei adjustable cam gears $100
Tomei Full metal gasket kit with oil restrictor $125
Whiteline bottom mount turbo manifolds $200
Garrett T28 turbos $500 each
HKS 3037 Turbo kit SOLD
Nismo timing belt $125
Greddy pulley kit $225
ATI Engine Dampener $400
CUSTOM MADE ONE OF A KIND BDL Fuel Rail LOOKS SICK!!!!!! $350
HKS valve cover garnish (VERY HARD TO FIND) $200
Driveline and other misc items
Top Hat RB26 to 240sx mounts $300
Top Hat RB26 to 240sx driveshaft $300
Nismo/Excedy twin plate clutch *USED CLUTCH* $600
Tomei RB25 short shifter *USED* $125
Trust 3' downpipes with collector $150
KOYO Aluminum radiator for KA (need it for the RB26 swap) $300
New rb26 alternator with custom mount $200
All wiring is included and uncut $300
RB25DET 5 Speed transmission $1500
All bolts and fasteners are included and most are labeled. They are all in bags
Full factory engine manual
Most receipts and paperwork for parts will be included
Several new OEM nissan seals and gaskets
I also spent A LOT of money having parts polished like the CAS, igniter, water neck, throttle bracket, turbo intake pipe, etc. That, and the powder coating job for the engine and valve covers.
And pretty much anything else I can find in the garage goes with it.
There might be more that I'm leaving out and I'll do my best to find it all. With proper tuning and fuel system I'd say 700WHP should be attainable on moderate boost
If you see something in the pictures e-mail me. There's so much ish that I don't feel like typing it all out.
http://img.photobucket.com/albums/v677/Wingnut500/P4070010.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070010.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070012.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070013.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070016.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4070017.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P4080072.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P8070019.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P9010026.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P8300023.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P1010014.jpg
http://img.photobucket.com/albums/v677/Wingnut500/P1010017-1.jpg
http://img.photobucket.com/albums/v677/Wingnut500/4.jpg
http://img.photobucket.com/albums/v677/Wingnut500/67y545hyh.jpg
http://img.photobucket.com/albums/v677/Wingnut500/66.jpg