WANTED: LT1 Parts

[SRT Brian]

Im building up a 383 LT1, and need these parts if I can get them used that would be sweet!

36# Injectors

Hardned Pushrods

Roller Rockers I belive I will need a 1.5

7/16" rocker studs & guideplates

ARP Headbolts

And any other aftermarket stuff.

[sr240]

whats this going in?

[Northwest outlaw]

In his dodge so it goes fast LOL J/K had to do it. It going in a 95 vet I think

[BlackMagic]

Brian, if you cant find this stuff used let me know and I will check on pricing through my vendor.

[SRT Brian]

Lol If I was going to do some crazy engine swap in my dodge I would put a Cummins in it. But no its going in a 95 Vette.

Magic, I found the Injectors used. But if you can check on, a LT1 Timming Chain, make sure its a double roller please, a Oil pump, and see what your price is for a fully forged rotating assemble. If you can beat summit prices for the stuff let me know and I will go with you. that mostly were im geting all the new stuff.

[bowtiy]

FYI, i did one of these with an eagle forged stroker rotating ass. and i had to grind the holy hell out of the oil pan rails on the block to clear the big end of the rods... if i did another one i'd opt for a nice I-beam rod instead of the h-beams that come in the kits.. this was supposed to be a no clearance needed kit too... just thought i'd throw you some past experiance;) also had the same issues with a 406 kit too.. called them up and asked why, they didnt have a good response...
Bowtiy

[SRT Brian]

Thanks man! The kit that im looking at is EATHER H-Beam rods or I-Beam.

[BlackMagic]

I can usually beat summit by a fairly nice margin on the aftermarket stuff.

If your looking for an OEM chain and pump I wont be able to do much. Give me a day or so to check on the rotating assembly.

[BlackMagic]

Also, which kit are you looking at through summit. That will give me a place to start with P/N's and such.

My vendor will put a kit together with any number of different components so the combinations are endless. Let me know if you have anything specific in mind.

[SRT Brian]

Ok here is what im looking at:

The Rotating ass. im looking at is with these guys strokerkits.com
Its JE Forged Dish pistions
Scat Forged Crank
Forged I-Beam Rods 6.0"
ARP Cap Screws

Price is $ 1,275.00
________________________
The Timming Chain is a GM Performance one part number 12370835 I would go with any that will work with the LT1 $260.00 - Might of found a used factory one tho
________________________
Fel-Pro Wire Ring Head Gaskets 1074
$38.00
__________________________
Oil Pump - Jegs - Not a high Vol
$38.00
__________________________
Roller Rockers - Proform
$185.00
__________________________
Hardened Trick Flow pushrods 7.1
$70-$80 out of Summit
__________________________
36# Injectors Used on LS1LT1.com
$125.00
_________________________
Head Bolts Dont know yet
$??

Thats the brake down of everything I found. If you can beat some prices let me know and I will go with you. Thanks again.

[SRT Brian]

O yeah then I found the gasket kit on E-bay for like $25 for everything.