~H22 Intake Manifold decision time~ please help

[lostkuase]

okay so its go time on my build, and i would like to get the intake choiced out before i go for my break in.

Im going to be boosted, my stock intake manifold has an egr as well as iab's. (see this is why you go b-series) i know thats what you will all say. However everyone has them i chose to be different. Due to my head being built and my bottom end sleeved w forged etc. i want to eliminate the iabs and egr altogether. So im looking for an intake that wont restrict boost, and will supply equal air to each individual runner. The factory design however i believe is flawed. I will mention this later.

ive read up on volumetric cc's etc of the runners and plenum design. However none of that helps unless i can fab up my own and still be able to compute what my flow would be, and would it have top end or mid range performance. So i must buy one.

My problem is there isnt that much available aftermarket help for H series.

Heres a list of everything i have found. Please help me choose out one as i am stuck, and dont want to pay a fortune for something that might be considered junk.

Calling all honda gods please help!

Fiber tuned 1.000 bucks

http://honda-tech.com/attachment.php?attachmentid=48756&d=1245730606

Golden Eagle - 600 bucks

http://d5otzd52uv6zz.cloudfront.net/group-f334ef97-5ae5-4530-ad11-452ca4283360-350.jpg

Skunk2- 300 bucks

http://www.weaponspeed.com/images/P/skunk2intakemanifold-07.jpg

Euro-r -

http://www.boomplustoys.net/images/JDM%20Honda%20Parts%20Cars/JDM_Accord_Euro-R_CL1_Intake_Manifold.jpg

K20 rbc intake w/ adapter- depending /around 300

http://www.honda-tech.com/attachment.php?attachmentid=47409&stc=1&d=1245248149

http://media.photobucket.com/image/H22%20intake%20manifold%20k20%20rbc%20w%20adapter/arseniceg/219.jpg

Magnus- 900
http://www.magnusmotorsports.com/images/honda_smim_large.jpg

Oem h22a-- already have

http://is.rely.net/1-64-70487-l-Ay8dSldRLhcv5FSEchQ.jpg

Oem/ modified -- time I dont have+50 bucks
basically its porting the inners and eliminating the iabs.

Dhracing top mount/ w factory bottom- 354 bucks

http://dh-racing.com/images/top-mount-intake.jpg


Any help/ideas are greatly appreciated!

[lostkuase]

obviously i cant go farbon ciber, did anyone see what happened to yangs hood, i just dont see it holding any boost/heat very well...

[lostkuase]

is it me or do all these look like junk besides the k20 rbc w adapter for h22 or skunk2???

[Turbo]

i have a stock h22 manifold thats already been modified (removed iab plate and all holes were ported out into runners) it also has a egr block off plate... asking 50 for bare manifold if ur interested... if not i have a venom h22 intake manifold also make me an offer

here what it looks like
http://i239.photobucket.com/albums/ff54/nabeastrr/maniported.jpg

[a1320honda]

Magnus is about the best one you have on there. but since im sure its out of your price range, go with the Skunk2. Stay away from Golden Eagle stuff as their quality has dropped significantly in the last couple years, Ask Rick how he feels about Golden Eagle.

[lostkuase]

anyone know how to reach this TURBO guy? I want to check out the venom he has. but pmed him and no response. Thanks

[talntid]

He's a flake.