PDA

View Full Version : Talon TSI ECU and Transfer case

2GTalonTSI
10-11-2006, 08:37 PM
These parts came from my 92 TSI:The car was wrecked last december, everything worked fine.

ECU $75.00
XFerCase 23 Spline 75.00
Full set of tails L,R,Center, $40.00 (they have a little paint dust from when I painted my mustang bumper cover can be cleaned)
Stock Corners (amber) $25.00

Let me know if interested in any of this...

Mark.
4STFED
10-11-2006, 09:15 PM
You are the guy the works near the DMV on the north side right? If so im the one who bought your mainfold and turbo in April. Im interested in the tcase if it is indeed a 21 spline...For some reason i thought you said it was a 23. Let me know and i can swing by this friday to pick it up.
talntid
10-12-2006, 12:46 PM
... different guy.... i think... cause I have his manifold and turbo, and it went to Steve a1320talon..
2GTalonTSI
10-12-2006, 01:17 PM
Oh damn I work by the Department of Licening, Let me count to splines tonight to make sure. Will bet back to you later.

Mark.
2GTalonTSI
10-12-2006, 01:20 PM
You are the guy the works near the DMV on the north side right? If so im the one who bought your mainfold and turbo in April. Im interested in the tcase if it is indeed a 21 spline...For some reason i thought you said it was a 23. Let me know and i can swing by this friday to pick it up.
I had two sets of the manifold and turbo... hmmm?
4STFED
10-12-2006, 01:45 PM
Im prolly mistaken but was your mustang black at one point in time?
2GTalonTSI
10-12-2006, 01:55 PM
You are the guy the works near the DMV on the north side right? If so im the one who bought your mainfold and turbo in April. Im interested in the tcase if it is indeed a 21 spline...For some reason i thought you said it was a 23. Let me know and i can swing by this friday to pick it up.
I had two sets of the manifold and turbo... hmmm?
Nope you are not mistaken... I had it painted about a month ago, I thought it would be a unique color. NOT!!! LMAO I have seen so many yellow mustangs in the past month. LOL
2GTalonTSI
10-12-2006, 08:32 PM
OK 4STFED sorry but yes it is a 23 spline. When I got my tranny it had no output shaft and just did the awap which was fairly easy to do. :D
4STFED
10-12-2006, 11:04 PM
Cool beans...Thanks for checking thought.

BTW i like the yellow better than the black...Nice paint job
2GTalonTSI
10-13-2006, 05:49 AM
Thanks man and good luck finding your parts. :)
4STFED
10-14-2006, 12:14 AM
Hey..Can you tell me if your ECU has an eprom? If so im down.

See figure 5a and 5b: http://www.tmo.com/howto/ecu1g/checkeprom.htm
2GTalonTSI
10-16-2006, 10:00 AM
Hey..Can you tell me if your ECU has an eprom? If so im down.

See figure 5a and 5b: http://www.tmo.com/howto/ecu1g/checkeprom.htm


Yes Sir I will check it out tonight when I get home!!! Will get back to you ASAP!!!
4STFED
10-16-2006, 10:45 AM
Sweet!
2GTalonTSI
10-19-2006, 09:00 AM
Sorry dude it is a non EPROM ECU!!!
4STFED
10-19-2006, 09:33 AM
Well...I would still consider buying it from you...How does $40 sound?
2GTalonTSI
10-19-2006, 09:52 AM
Make it $45.05 and we have a deal!!! :O
4STFED
10-19-2006, 09:59 AM
Sounds good...But i do charge a $5.05 pickup fee...That is, unless you want to deliver it to the valley :-)
2GTalonTSI
10-19-2006, 10:05 AM
But don't you live on the northside. LOL How far out in the valley are we talking man...?
4STFED
10-19-2006, 10:12 AM
Yeah i do...im just trying to weasel you down :-). I work in the Valley. So $40 bucks sounds good?
2GTalonTSI
10-19-2006, 10:18 AM
OK you can keep the .05 and we have a deal! :)
4STFED
10-19-2006, 10:25 AM
Fine...Deal

What time you get off work? Im in the Valley and dont get home till about 5:30 - sometimes 6. Ive got next friday off it you want to do it then or we could meet this weekend - up to you.
2GTalonTSI
10-19-2006, 10:30 AM
I usually leave around 5:00pm, next friday would be cool for me. let me know.
4STFED
10-19-2006, 01:56 PM
Yea...I will remind you next Wed/Thurs to bring it with you. Ive got next Fri off and it just so happens to be a payday too!
2GTalonTSI
10-19-2006, 01:58 PM
Cool that will work for me...
2GTalonTSI
10-27-2006, 09:41 AM
John do you still want the part, I will be in spokane later this evening... Let me know.

Mark.
4STFED
11-03-2006, 05:43 PM
Mark! I totally flaked on this! I still want to buy it. Can we arrange this again for next weekend? Let me know - wont happen again!
2GTalonTSI
11-07-2006, 09:22 AM
OK friday should be cool. let me know AGAIN!!! LOL
4STFED
11-07-2006, 09:31 AM
Well...I work this weekend - Friday AND Saturday so how about Sunday? Lemmie know.
2GTalonTSI
11-07-2006, 09:35 AM
OK sunday will work...