PDA

View Full Version : Any one around Spokane or close by have CMR?

SRT Brian
02-06-2010, 09:50 AM
So I NEED a dyno tune on my car pretty bad. I use the Diablosport and I need to find someone that has CMR software to do a dyno tune. Anyone?
x NOODLES x
02-06-2010, 03:22 PM
Whats CMR??

Brian uses Diablosport's all the time.......
SRT Brian
02-06-2010, 04:08 PM
CMR is the software that alot of dyno tuners use on there computer to custom wright a tune that is readable by the Diablo.
whe3ls
02-06-2010, 04:35 PM
give brain a call at shelly's
x NOODLES x
02-06-2010, 04:40 PM
He doesnt have that CMR. He has HP tuners software, and has access to SCT's software if he needs it (I have it). :D
SRT Brian
02-06-2010, 06:38 PM
O ok. dose that HP Tuners make tunes for the Diablo?
x NOODLES x
02-06-2010, 08:15 PM
No, its a seperate system, like SCT, or diablo.
SRT Brian
02-06-2010, 09:55 PM
O ok. That wont work
x NOODLES x
02-07-2010, 08:44 AM
Why not? You don't HAVE to use the Diablo do you? I bought a Predator for my truck and it didnt do crap, and he tuned it with HP. I'l just sell the predator.....

There should be some online company that can write you a 'base' tune and send it through email, if you have the USB hookup for the handheld....
SRT Brian
02-07-2010, 08:46 AM
Yeah with my car deablo is the only tunner out for it. I have a base tune. I need to data log and send it to the guy to get a better tune. But the dyno tune is way better.
x NOODLES x
02-07-2010, 09:22 AM
You mean the only handheld out??

cause I'm pretty sure with the actual tuning software brian has he can do ANY car....
Team Addiction
02-07-2010, 09:39 AM
You mean the only handheld out??

cause I'm pretty sure with the actual tuning software brian has he can do ANY car....


Last I checked HPtuners does not have support for the magnums if any dodges at all yet.
IIRC the interface cable for the Diablo is about $50 bucks I just dont remember the sofware cost at the moment. I can call and check Monday if you want. We were a Diablo dealer we just havent done much with them in awhile.
SRT Brian
02-07-2010, 09:42 AM
I have the interface cable. Thats why I can data log in my car and veiw pretty much anything I want. The CMR software for the dyno is about $1500. CMR is the software that wrights tunes for the Diablo. I know there is a place in Seattle. I think its PIR. maybe? E-mail tunes work just takes more. Data log, send it to the tunner, wait for the new tune, load the tune.
SOMTA
02-07-2010, 11:28 AM
Last I checked HPtuners does not have support for the magnums if any dodges at all yet.
IIRC the interface cable for the Diablo is about $50 bucks I just dont remember the sofware cost at the moment. I can call and check Monday if you want. We were a Diablo dealer we just havent done much with them in awhile.

HP Tuners does like 99% of all GM and has just started to get into the Ford engines in the trucks and Mustangs, don't think they have messed with much on the Dodge side.
spaz_22
02-08-2010, 09:29 AM
Hp tuners probably will never make anything for dodge as the pcm code is not an open source. Diablo is about the only thing out there for us dodge guys, and the cmr software is very expensive. Idk about the. Sct does support dodge, so maybe try them and keep your predator as a datalogger, that's what some srt4 guys do as the sct tuner allows a full firmware rewrite as the diablo is limited to the stock firmware
SRT Brian
02-08-2010, 04:44 PM
O ok. I saw the SCT they do have a tunner for me. but I heard bad things about them.
x NOODLES x
02-08-2010, 04:49 PM
My SCT stuff works just fine. And I've had wonderful experiences with their tech on the phone.
x NOODLES x
02-08-2010, 04:50 PM
Hp tuners probably will never make anything for dodge as the pcm code is not an open source. Diablo is about the only thing out there for us dodge guys, and the cmr software is very expensive. Idk about the. Sct does support dodge, so maybe try them and keep your predator as a datalogger, that's what some srt4 guys do as the sct tuner allows a full firmware rewrite as the diablo is limited to the stock firmware

You can datalog through SCT's FREE livewire system off their website.
spaz_22
02-08-2010, 05:50 PM
Not for dodge. They have pretty much stopped support for dodge. Sct I mean. dodge hasn't released tghere code for there pcms and probably never will. Diablo somehow figured it out, but sct does not wamt to spend the resources to break the code. Sct was supposed to have datalogging for mopar 2 years ago, but don't ask them about it now, they get pretty pissed. I have heard mixed reviews about sct for the srt4 as well, but what I've come to conclude is that it depends on the tuner since the end user cannot adjust anything.