Got the cage done in the chevelle this weekend Thanks to boogyman!

[Trannyman]

http://i79.photobucket.com/albums/j125/polishd69/Currentpicsoncamera020.jpg

http://i79.photobucket.com/albums/j125/polishd69/Currentpicsoncamera019.jpg

http://i79.photobucket.com/albums/j125/polishd69/Currentpicsoncamera012.jpg

http://i79.photobucket.com/albums/j125/polishd69/Currentpicsoncamera017.jpg

http://i79.photobucket.com/albums/j125/polishd69/Currentpicsoncamera028.jpg

[MustangGirl]

Cool Noah! I should have stopped by with a basket of hot wings for ya :) ha ha

[BOOGEYMAN]

I had a good time at your place this weekend Noah!!! The cage came out bitchin, beer and lots of welding is always a great time. I didnt know you snaped a pic of me welding, lol. I cant wait to do your truck when you get home from Mexico.

Travis.

[Trannyman]

Oh dude the Truck is gonna look like sex when were done!

[BOOGEYMAN]

Ya buddy, just take the chevelle and times the bars by 3 and thats what the truck will look like!! LOL. I said fuck it and ordered a notcher tonight from Speedway so we will be ready to rock on the truck project!!! Later dude.

Travis.

[Trannyman]

What do you think about an F2 procharger inercooled its a little more spendy but still bling!

[BOOGEYMAN]

The F2 is a sweet blower!!! We could still make 1500+ with the F-2 and the engine for the truck with out the pair of 76's. I think the turbo set up is going to be way more streetable for you and have a much better power cure that you are looking for vs the F2!! The way the turbos will hit and make horsepower/ torque at a much earlier rpm it will benefit the truck chassis better than the F2 will. Not to mention you wil need a 5k stall for the F2 vs a 3000 to 3500 for the turbo set up.

I have a lead on a some 76's, just waiting to hear back from a few people!!!

Travis.

[twotons]

looks bitchen Noah, Is that the same engine for the truck? What are the plans for the truck? halla at me sometime or stop by the house for a brew.

[BOOGEYMAN]

Truck plans are top secret.......haha. Lets just say well over 500 inch with a pair of 76's, Dart block, air to water.......all the goodies!!!!

Travis.

[twotons]

looks like a nice job there Travis, what did you end up with on the notcher or did you just cut and grind? again it looks real good.

[BOOGEYMAN]

Just the good old trusty cut off wheel and a sharpie!!! This was my 5'th cage so it went real good with the cut off wheel and the grinder to touch it up a bit!! It looks so awsome in that car the pic's do no justice for it! I will have his truck done in the next month and I cant waint t get started on it.

Travis.

[twotons]

right on man, if you are bored this week, stop by my place ofter work, i ll be doing some wiring on my buddies truck and i ll have some drews around so dont be shy.lol.
I had a blast in Boise asside frome not having enough drinking time,lol. Next year will be better FO SHORE,hahaha

[BOOGEYMAN]

hell ya sounds good!!!! What days are you working on it???

You were very bussy with Kens ride at Boise!!! But I guess thats ok when you are working on a ride with a 2,200 hp small block in it.

[twotons]

kinda what i was thinking, I was invited to go to Promona and pheonix with him next spring and i am all over that lol. anyway working on the truck pritty much all this week, so call before you head out.

[BOOGEYMAN]

I know what you mean, Todd invited me to vegas with him and Steve Schmidt but I couldn't take another week off so soon....oh well, I think I am going to go next year for sure! Talk to you later this week!

Travis.

[twotons]

i was sapposed to go to Vegas with ken but there again to much stuff to do at the shop, later talk to you this week maybe.

[rrussell]

Nice Work on the cage Travis!:cool:

[BOOGEYMAN]

Thanks buddy!!! Send them this way!

Travis.

[talntid]

... I need to go to school for auto body/welding.. I want to be able to do that stuff....

[BOOGEYMAN]

No school here buddy......

[talntid]

Well I don't have the tools or a Mentor, so school looks like it would be my only option. My father is an excellent welder (Welds for Avista Corp) but he doesn't get to bring the welders home, and does not weld enough at home to justify purchasing one..

[Trannyman]

No school here buddy......

LMFAO OG TRIPPLE OG GANGSTA!!!!!!!!!!!!!!!!11

[Trannyman]

Yea 76ers sound pretty good to me.

[Trannyman]

looks bitchen Noah, Is that the same engine for the truck? What are the plans for the truck? halla at me??sometime or stop by the house for a brew.


Naa im actually doing a 496 4340 eagle rotating assemble for the chevelle Solid Roller cam. Hope to shoot for the 9s if it will hook~

[Trannyman]

Yea I have most of the parts for the Green Truck Transformation me and Travis are gonna do to it this winter. We just need to buckle down and get it done with. Engine is Top secret LOL its gonna be fun that's about it!:cool:

[ntrcptr90]

Is it me or the pics, why do the A pillar bars look so low at the main hoop and the windshield?

[Trannyman]

nope that's how they fit in there not much room to spare really!

[il_wolf_li]

I saw your post on turbomustangs Travis and it looks like the turbo's will be pretty spendy.... I found this on there that would work pretty badass on a 500+ inch motor... The price isn't to bad either.

http://www.turbomustangs.com/smf/index.php?topic=71201.0

[BOOGEYMAN]

Ya I got a pair today all set up . Two brand new Precision GTQ -76's for $2,260. They will be much better on the street than a huge single and boost will come on much sooner for what we are trying to do, thanks for the link though.

Travis.

[BOOGEYMAN]

Is it me or the pics, why do the A pillar bars look so low at the main hoop and the windshield?


More the pic's than anything. The bars were so tight on the roof you had to force them in so I trimed a bit and found the best spot for them. Noah can still get a headliner in and use his visors the way they are now as well as he need to be able to get all his trim/interior pieces in.

Travis.

[twotons]

where did you find the 76's trav? that is a pritty good deal. what are you doing for headers and piping?

[Trannyman]

Yes thoes 76MM are gonna be mine pretty soon We don't have headers or piping yet but me and Travis prolly beable to figure it out!

[BOOGEYMAN]

I founs the 76's from Brian at B&G custom Turbo, he is running a special on any Precision turbo 67mm to 76mm in a GTQ trim untill the end of Dec. If you are a member on TM.com you get a way better deal as well, just cant beat his prices right now! You have to call for pricing.

As far as piping and headers we are just going to get some flanges and a bunch of J and u bends and go for it, make some bitching tubular headers for it. Probly go with dual 3 inch down pipes as well as dual 3 inch exhaust with a set of borlas all the way ou the back.

Travis.

[Trannyman]

Yea I can't freakin wait hehe

[BOOGEYMAN]

Noah you truly live by your signature!!!!

Travis.

[Trannyman]

Im rick james bitch:cool:

[Trannyman]

Hey travis maybe this week could get together I might need to order that shit up!

[BOOGEYMAN]

Sounds good man!!! We will go to applebees and have 20 or so beers and spend some cash!!! LOL.

[Trannyman]

Sweet the wife can drive are drunk asses there! it will be a blast.! You down for helpin me on doing the disc break conversion on chevelle this weekend? Im gonna order my rear breaks tommaro and prolly some Drag springs up front get a better stance!

[BOOGEYMAN]

Souns great!!! We can maybe take the GTO the the dyno to watch a few pulls and then go back to your place and do the conversion! I better put a new liver on order soon......lol

Travis

[Trannyman]

bwa hahahaha yea better not stop drinking or your liver will shut down. I talked with brian today about bringing the GTO out to see what it will do if we get there early we can get it done. I really dont' care what that car makes but I em curious because it does fry the fuck outta the tires LOL

[BOOGEYMAN]

ok sounds like a plan then!!!

Cam specs....
solid roller
254/248 @ 50
.710 lift
115 lope sep.

Travis.

[Trannyman]

WOW duration is very streetable Crazy Hi lift was that a solid roller cam?

[BOOGEYMAN]

YEP, we will get with Marty and see what he thinks for a cam as well.

Travis

[Trannyman]

This is what the chevelle looked like this summer LOL

http://i79.photobucket.com/albums/j125/polishd69/Picture067.jpg

[BOOGEYMAN]

bawhahaha, I love it!!! I remember when it looked like that as well, really not that long ago eithor! Take a pic of the truck right now as well, looks almost the same....LOL

Travis.

[Trannyman]

http://i79.photobucket.com/albums/j125/polishd69/Newpics004.jpg

[Trannyman]

bwa hahahah it was a great Garabage collector!

[BOOGEYMAN]

Get those 4 wheel disc brakes ordered up so we can get that done this weekend buddy.

Travis.

[Trannyman]

I already have the Front conversion here I just need the back brakes now dude! i'll order them tommaro!

[BOOGEYMAN]

SWEET, I ahve never done a conversion set up on a chevelle so I cant wait to get it done!!!

Travis.

[Trannyman]

Yea it can't be that bad we should knock it out farily easily!

[twotons]

very simple, what kit are you using, i have done about a half dozen of the willwood 12 inch kits. they are nice and easy.

any??????'s halla at me.

[Trannyman]

I got wilwood for the back on the 9inch and regualr disc brakes up front!

[BOOGEYMAN]

Found a better hook up on the turbos today!!! I got an email and for the exact same turbo and stilll brand new I can get them for 1050 instead of 1129!!! Hell ya buddy, I may just buy a pair to have on hand at those prices.

Travis.

[Trannyman]

haha Yea I don't have the change to do that right now but I will deff try to get those!